E. How To Clean and Maintain Your eRapid
11 Questions about eRapid? Call 1-866-335-6943
Step E12:
Insert the Aerosol Head
so the ”eRapid” label is
upside down (
Figure
E12
). Being careful to touch
ONLY
the plastic outer ring of the Aerosol Head,
squeeze the 2 flexible plastic arms on the side of
the Aerosol Head together while firmly inserting 2
plastic tabs and 2 metal prongs into the 4 holes of
the
Easycare
. The Aerosol Head will snap into
place when it has been properly inserted. Then
close the
Easycare
making sure that the 2 side
engaging hooks snap into place.
Step E13:
Connect the Easycare
to the Controller using the
Connection Cord by attaching the horseshoe-
shaped end of the Connection Cord upside down to
the hinge of the
Easycare
part and swivel it
downwards (
Figure
E13
). Make sure that the
Connection Cord’s metal contacts engage with the
Aerosol Head’s metal inserts. Connect the other
end of the cable to the front of the Controller.
Step E14:
Add about 1 teaspoon (5 mL) of distilled water
or saline solution to the mark in the
Easycare
funnel opening
(Figure E14)
.
Step E15:
Start the Controller
by pressing and holding the
On/Off button for 10 seconds until the Controller
beeps and displays the
Easycare
screen (
Figure
E15
).
E15
E12
E13
E14
Metal Prong
Plastic Arm
Easycare
(Opened)
Hinge
Connection Cord
(Upside Down)