The heat generated by the detector itself will affect the imaging effect of the device. Through the shu�er correc�on
func�on, the device will detect any slight heat changes which exceed a set range, devia�on will automa�cally close
the shu�er and the device will perform a self-calibra�on. This will improve edge to edge clarity on the image.
Press the [+/-] to move the cursor to the shu�er calibra�on se�ng op�on and press the [
OK] to enter the
Press the [+/-] to move the cursor to select "Auto", "Manual" or "Close" shu�er correc�on.
Press [OK] to save and return to the previous page.
The device can detect and display the highest temperature point on the screen and automa�cally keep tracking this
target heat source.
Press [+]/-] to move the cursor to the hot track se�ng op�on and press [OK] to enter the sub-menu.
Press [+/-] to move the cursor to select “Off” or “On”. Press [OK] to save and return to the previous page.
1
0. Hot Track
：
24
1
1. Self-ac�vated Recording:
By turning on the self-ac�vated recording, the device will automa�cally record in 20 second intervals when it senses
the recoil from the shot. The incremental 20-second video footage will be saved on the TF card.
move the cursor to select "Low", "Medium" or "High" mode. Press [OK] to save and return to the previous page.
Press [+/-] to move the cursor to the self-ac�vated recording se�ng and press [OK] to enter the sub-menu.
Press the [+/-] to move the cursor to select the op�on “OFF”, “ON” and “Impact Sensi�vity”.
A�er selec�ng “Off” or “On”, press [OK] to save and return to the previous page.
A�er selec�ng "Impact Sensi�vity", press [OK] to enter the sub-op�on menu of sensi�vity level, press [+/-] to
sub-menu.
