Paravan movanimo touch Operating Manual Download

Page: 116 / 144

114 von 147

Gener

Inf

ormation

epar

Oper

ate

Help

Technology

- Safety-related controls and maintenance -

mov06_EN_Rev.2.1

15. Safety-related controls and maintenance

The device must be examined once a year in a technical safety inspection (TSI) and technical measure-

ment evaluation TME - together with this operating manual and the appropriate medical product book.

These inspections must be performed exclusively by persons who can properly execute these examinations

based on their training, expertise and experiences, gained during their practical occupation. They must be

able to perform these inspections without instructions.

Terms: One-year

•

General visual inspection

•

Electrical safety inspection according to VDE 0751 (protective wire inspection, discharge current)

•

Inspection of the safety concept according to valid inspection instructions

•

General functional check

All maintenance must be exclusively performed by companies that have been authorized by PARAVAN me-

dical GmbH to perform maintenance work on the respective device type.

Summary of Contents for movanimo touch

















































































































































Search results

Summary of Contents for movanimo touch

Reviews:

Related manuals for movanimo touch

Brands by name

Popular brands

Paravan movanimo touch, Operating Manual

Search results

Summary of Contents for movanimo touch

Reviews:

Related manuals for movanimo touch

Brands by name

Popular brands