81 von 147
Gener
al
Inf
ormation
Pr
epar
e
Oper
ate
Help
Technology
- Operating the touch panel -
mov05_EN_Rev.2.1
10.6 ASC – Anti-spastic control
The anti-spastic control (ASC) protects you during passive training from over-exertion
or inappropriate straining in the case of spasms. The pedals stop as soon as movani-
mo recognizes a spasm. Additionally a red bar appears on the touch screen. The pedals
remain motionless for ca. 4 seconds, and then the movement starts anew. By default
the machine will start out in the opposite direction. You can change the restart direction
(forward, backward, opposite direction) in the menu Settings (see Chapter 13.6).
The severity of spasms differs from patient to patient; therefore the sensitivity of the
movanimo spastic control is customizable. By pressing the button ASC level during the
current training, you can access the settings menu for the anti-spastic control.
Under this setting you can adjust the sensitivity for the spastic control with the Plus-/
Minus buttons. You can select a level for ASC from 1 = very sensitive to 6 = less sensiti-
ve. If you set the anti-spastic control to a very low level, it will be triggered very quickly
and stop the machine during training. If set to higher values, the ASC will only recognize
more severe spasms.
If required, the anti-spastic control can also be deactivated under the menu Settings
(see Chapter 13.6).
Fig. 35: Adjus-
ting the anti-
spastic control
Fig. 36: ASC
aktiviert
