FRONT
UNPACKING YOUR BIKE
ASSEMBLY INSTRUCTIONS
A T L A S F I T N E S S B I K E
TOOLS NEEDED
(Included)
TOOLS NEEDED
(Not Included)
PLEASE KEEP THESE INSTRUCTIONS FOR
FUTURE USE & REFERENCE. DO NOT DISCARD.
WARNING:
Serious injuries and even death can occur if
the proper safety precautions are not followed.
1
Cut the shipping straps on the outside of the box.
Remove the box staples to prevent any cuts that can occur while you’re unpacking your bike. Lift bike out by frame and rear
wheel.
IMPORTANT:
Rotate the fork (looks like a wishbone) so that it is facing forward of the bike
(Fig. 1).
Place the bike on the ground,
so it’s standing upright on the fork dropouts and rear tire.
Cut all of the packing zip ties.
Separate the front wheel from the bike by carefully slipping it away from the crank arm, which is resting within the spokes.
Remove the accessory box and set it aside.
Examine your new bike for any visible damage that may have occurred during shipping.
Special Note: For tightening all fasteners, please refer to Appendix D in the back of your owner’s manual for all fastener torque specifications.
1.
2.
3.
4.
5.
6.
7.
1
x3
4,5,6 mm Hex Wrench
x1
10-function multi-tool
x1
Phillips Screwdriver
x1
Scissors
x1
15mm open end wrench
or adjustable wrench
1
