17
LT6488 issue 1 (06/13)
Paragon P6
Installation Instructions
SECTION NINE Checking the Operation of the fire Continued
FITTING OPERATING LEVER
With the fascia in position pass the 4m threaded bar through the hole in the front base of the
fascia.Screw the threaded bar into the end of the valve spindle.
With the threaded bar in place. Pass the 6mm tube over the bar until it makes contact with the
clip on the spindle assembly.
Finally screw the decorative knob onto the exposed thread.
ADVISE CUSTOMER THAT:
The glass front of this fire acts as a dress guard, conforming to BS 1945 (1997) and satisfies the
heating appliance regulations (1991) however; a fireguard conforming to BS6539 (1997) must be
used to protect young children, the elderly, or infirm.
The curing effect of heating the logs and other refractory components will cause an initial odour.
This is due to the starch used in the manufacturing process and is non-toxic.
Any debris should be cleaned from the appliance. A vacuum cleaner can be used but only after all
the loose logs have been removed.
The appliance should be serviced annually by a competent person in accordance with these
instructions and the appliance checked for spillage in accordance with the method detailed in
these instructions.
Demonstrate the lighting and extinguishing procedures to the user and the removal and refitting of
the Fascia and glass panel for cleaning. Refer to the user section of this booklet.
If ventilation is fitted for any reason it must be checked regularly to ensure freedom from
obstructions.
Hand these instructions over to the user.
