14
LT6488 issue 1 (06/13)
Paragon P6
Installation Instructions
SECTION EIGHT To Install the Appliance Continued
Fit the front glass panel within the bottom retaining bracket, position the glass panel central with
the outer side edges of the panel running flush with the two side glass panels.
Slide the top glass front retaining bracket over the five fixing studs and fit and tighten the 7mm
nuts, making sure again that the glass panel is flush and central.
Final tighten the four 7mm nuts retaining the LH and RH glass panels.
BATTERY CONNECTION POSITION.
Before operating the appliance the battery must be fitted to the spark generator. The generator
and boot connection is located on
the base of the fire box on the
right hand side. Connect the
battery to the boot connect and
place the battery directly under
the spark generator unit.
