Paragon FOCUS HE SLIMLINE SC, Owner'S Manual

Page: 5 / 28

5
LT5316 (iss 5) 10/10
FOCUS HE SLIMLINE SC Users Instructions
SECTION THREE Fuel Bed Cleaning and Layout
Warning: - Before you clean any part of the appliance ensures that the appliance is turned off and
cold.
Important: -
Refer to the ‘Health & Safety Notice located on page 3 of this booklet
before
cleaning or replacing any refractory material.
The fuel bed components are delicate and they should be handled with great care.
The loose parts and moulded shapes may be removed for cleaning. They can be brushed very gently
with a soft brush to remove dust or any deposits.
A vacuum cleaner may only be used after the loose components and moulded shapes have been
removed.
CARE SHOULD BE TAKEN TO AVOID CONTACT WITH THE REFRACTORY LINING THIS IS A
DELICATE SURFACE AND SHOULD
NOT BE WIPED OR RUBBED.
REMOVING GLASS PANEL

Remove the trim, which is held in position with magnets.

Remove the fret and ash pan cover.

Lift of the canopy and remove.

Remove the glass fixing clamp secure with three securing nuts and lift it out of the retaining
brackets. Take care to support the glass panel when removing the fixing clamp. The glass should
be place in a safe place to prevent damage.

Once the fuel bed has been laid reassemble in reverse order.