Paragon FOCUS HE SLIMLINE SC, Owner'S Manual

Page: 10 / 28

10
LT5316 (iss 5) 10/10
FOCUS HE SLIMLINE SC Users Instructions
SECTION FOUR Cleaning Continued
CLEANING: PILOT ASSEMBLY
Pilot Cleaning (Before cleaning ensure that the appliance is turned off and
cold)
In some instances you may experience ignition problems even when the
appliance is new. This may be due to the aeration hole in the pilot body
(see photograph) being partial blocked with dust, pet hairs or other foreign
matter. The source of this debris could be such things as carpet fibres,
decorating or pet etc.
To clean the pilot, remove the fire front and ashpan. The pilot is located on
the right hand side of the appliance, any debris in or around the aeration
hole should be remove using the nozzle of a vacuum cleaner. It is
advisable not to blow the debris into the hole as this may cause more of a
restriction and not rectify the problem.
Note: - Take care when cleaning in this area so as not to damage the pilot assembly.
SECTION FIVE General Points
Like all appliances incorporating an aerated burner a low frequency noise may be heard.
It is advised that the FOCUS SLIMLINE SLIDE CONTROL fire be serviced annually by a competent
person. The fire is more likely to provide trouble-free operation. The actions given below should be
carried out during that service.
Dulling and slight discoloration inside the firebox will occur adding to the realism of the appliance, this
is quite normal.
It is important that: -

The chimney or flue is checked annually to ensure clearance of combustion products.

The fire front must be positioned in front of the fire whilst it is burning

Any debris from the chimney or flue should be removed. The fire should be allowed to cool before
it is removed.

The fire must not be used if the glass panel is not fitted or damaged - this includes the seal.

The fire must not be used if the canopy is not fitted.

The data badge is located behind the fret on the right hand side of the appliance.
The only user removable parts are: -

Fret

Refractory Fire bed Components

Canopy.

Trim.

Glass panel.