3. DSL Card Configuration
3-32
April
2002
8000-A2-GB26-70
2. Enter 0 (zero) to add a new filter. The IP Filter Configuration screen appears.
3. Configure the filter by responding to the prompts in the input field. An IP filter
consists of a set of rules. TCP/UDP/ICMP traffic types can be selectively
forwarded or discarded based on the conditions specified in the rule. If you
change the ICMP field to Selective, the ICMP Filter Configuration screen
appears.
4. To filter, select the type (example: 3-3), then enter Discard for the Action.
There are multiple pages of options. When finished, return to the previous
screen.
5. Enter No to save (not delete) the rule.
6. Enter the next rule number to define for this filter.
7. Bind the filter to an interface(s) using the General Interfaces screen (A-C-A).
