C. Hotwire 6350 ReachDSL Modem
8000-A2-GB26-70
April 2002
C-5
Increasing the Number of End-User Systems
A single end-user system is attached to the Hotwire 6350 ReachDSL Modem by
using an Ethernet crossover cable. To increase the number of end-user systems,
connect all the PCs to an Ethernet hub using a straight-through cable.
The Hotwire ReachDSL port card supports 32 hosts/subnets per DSL port and the
Hotwire ReachDSL Modem supports up to 256 MAC entries.
Cables & Connectors
Standard twisted-pair CAT3 or better cables are recommended.
The LINE and PHONE interface connectors
use 6-pin, non-keyed modular plugs. RJ11 or
RJ14 6-pin connectors can be used.
Line & Phone Connectors
The LINE and PHONE jack pinouts are either filtered or unfiltered for POTS.
Pin #
Function
1
Not used
2
Ring 2 (optional)
3
DSL Ring 1
4
DSL Tip 1
5
Tip 2 (optional)
6
Not used
PHONE Jack Pinouts
LINE Jack Pinouts
Pin # 3, 4
Filtered for POTS
Pin # 3, 4
DSL and POTS
Pin # 2, 5
2nd POTS unfiltered
Pin # 2, 5
2nd line pass-through
98-15304a
6-Pin
RJ11 Plugs
Pin #1
Pin #6
