8000-A2-GB26-70
April 2002
B-1
B
Traps
DSL Card Traps
Traps are configured via a Telnet or terminal session. The addition or removal of a
card or another hardware component within the Hotwire DSL system causes a trap
to be generated. These traps indicate a configuration change notification (CCN) of
a card (a hardware replacement or a software upgrade).
Table B-1.
DSL Card Traps (1 of 3)
Event
Severity
Comment
Trap #
MIB
CCN
(Configuration
Change Notice)
warning
Configuration change caused
by one the following events:
Software download.
Configuration download.
Card removed (objective).
7 hot_sys.mib
(Hotwire system)
warning
Configuration change
affecting the entity MIB.
1 hot_domain.mib
(Enterprise MIB)
Cold start
warning
Card has been reset and
performed a cold start.
0 MIB II
(RFC 1213)
Configuration
download
failure
warning
Configuration download has
failed.
2 hot_diag.mib
(Hotwire
diagnostics)
Device failure
major
Access Node’s software has
detected an internal device
failure.
15 hot_sys.mib
(Hotwire system)
DHCP Address
in Static Subnet
minor
The DHCP server is
attempting to assign an
address in the range of static
subnet on a different port.
19 hot_sys.mib
(Hotwire system)
DHCP filter
security failure
minor
Cannot add new route; route
table contains maximum
number of rules.
11 hot_dhcp.mib
(Hotwire DHCP
Relay Agent)
