16
Connect a 2-Line Phone to the Existing
and Additional Phone Line
Use the following procedure and supporting figure to connect your SuperLine IAD to a
single phone with two lines. This configuration can be used if you have one or two
additional phone lines through your SuperLine IAD.
Cables Required (Supplied)
H
6-foot phone cable (RJ11).
Cables Required (Not Supplied)
Obtain the following from your local electronics or phone store if they are not provided
with other equipment you have bought.
H
Existing phone cables.
"
Procedure
Connect the SuperLine IAD:
Plug one end of the supplied phone cable into the LINE jack on the SuperLine IAD
rear panel.
Plug the other end of the cable into the wall jack.
Connect Line 1:
Connect Line 1 of your 2-line phone to the BASE PHONE jack on the SuperLine
IAD rear panel.
Connect Line 2:
Connect Line 2 of the 2-line phone to the PHONE 1/2 jack on the rear of the
SuperLine IAD.
Connect the AC Power Transformer:
Insert the power cord’s cylindrical plug into the jack labeled POWER on the
SuperLine IAD rear panel. Plug the transformer into an ac power outlet.