12
Home Office: Add High-Speed Data Service,
a Fax Machine, and an Additional Phone
Use the following procedure and supporting figure to connect an Ethernet-ready PC,
fax machine, and additional phone to your SuperLine IAD in the same room. You must
have ordered two additional lines and Ethernet data service.
Cables Required (Supplied)
H
6-foot phone cable (RJ11).
Cables Required (Not Supplied)
Obtain the following from your local electronics or phone store if they are not provided
with other equipment you have bought.
H
8-pin Ethernet crossover cable.
H
Existing phone cables.
"
Procedure
Connect the SuperLine IAD:
¶
Plug one end of the supplied phone cable into the LINE jack on the SuperLine IAD
rear panel.
·
Plug the other end of the cable into the wall jack.
Connect to High-Speed Data Service:
¸
Connect the network interface card of your PC to the ETHERNET jack on the
SuperLine IAD rear panel with a crossover cable. (If you are connecting to a hub,
you need a straight-through Ethernet cable. See
High-Speed Data Service on
page 22.)
Connect the Fax Machine:
¹
Connect a fax machine to the PHONE 1/2 jack on the SuperLine IAD rear panel.
Connect the Additional Phone:
º
Connect a phone to the PHONE 2 jack on the SuperLine IAD rear panel.
Connect the Existing Phone Line:
»
If you wish to have your existing phone line available in this location,
c
onnect your
existing phone to the BASE PHONE jack on the SuperLine IAD rear panel.