22
Connect to High-Speed Data Service
The SuperLine IAD allows you to connect to a PC network interface card or hub for
high-speed Internet access. Contact your service provider to determine if this service is
available in your area.
Cables Required (Supplied)
H
6-foot phone cable (RJ11).
Cables Required (Not Supplied)
Obtain the following from your local electronics or phone store if it is not provided with
other equipment you have bought.
H
Straight-through or crossover Ethernet interface cable. Refer to
Ethernet Cable on
page 29 for Ethernet cable pin configurations.
"
Procedure
Use the following procedure to connect your SuperLine IAD to a PC or hub.
Connect the SuperLine IAD:
¶
Plug one end of the supplied phone cable into the LINE jack on the SuperLine IAD
rear panel.
·
Plug the other end of the cable into the wall jack.
Connect to High-Speed Data Servce:
¸
Plug one end of the cable into the ETHERNET jack on the SuperLine IAD rear
panel.
— Use an 8-pin Ethernet crossover cable to connect your PC.
— Use an 8-pin straight-through cable to connect to a hub.
¹
Plug the other end into your PC network interface card or hub.
Connect the AC Power Transformer:
º
Insert the power cord’s cylindrical plug into the jack labeled POWER on the
SuperLine IAD rear panel. Plug the transformer into an ac power outlet.
»
Verify that the ETHERNET indicator on the SuperLine IAD front panel is lit.
NOTE:
Your PC must be on in order for the ETHERNET indicator to light.
