18
Connect a 2-Line Phone to Two Additional Phone Lines
Use the following procedure and supporting figure to connect your SuperLine IAD to a
single phone with two lines. Use this configuration only if you have two additional phone
lines through your SuperLine IAD.
Cables Required (Supplied)
H
6-foot phone cable (RJ11).
Cables Required (Not Supplied)
Obtain the following from your local electronics or phone store if it is not provided with
other equipment you have bought.
H
A 2-line phone cable (RJ14C) to connect Lines 1 and 2 of your 2-line phone to your
SuperLine IAD. Refer to
Technical Information on page 23 for more information.
"
Procedure
Connect the SuperLine IAD:
Plug one end of the supplied phone cable into the LINE jack on the SuperLine IAD
rear panel.
Plug the other end of the cable into the wall jack.
Connect Lines 1 and 2:
Connect your 2-line phone using your 2-line RJ14C phone cable to the PHONE 1/2
jack on the SuperLine IAD rear panel. The 2-line phone cable connects both lines
through the PHONE 1/2 jack.
Connect the AC Power Transformer:
Insert the power cord’s cylindrical plug into the jack labeled POWER on the
SuperLine IAD rear panel. Plug the transformer into an ac power outlet.
Complete the Installation:
Attach phone filters to all your other existing phones. Refer to
Connect Phone
Filters to Your Existing Phones on page 14.
Your SuperLine IAD installation is now complete.