Tesla to J1772 Adapter
User Manual
Specification
Troubleshooting
Voltage
: Max 250V AC
Current
: Max 40 amps
Operation Temperature
: -30°C to +50°C
Charging Port
: SAE J1772 Standard
Connector Port
: Tesla US
Cable Length
: 3.9 inches (10cm)
Weight
: 1.83 lbs (0.83kg)
For more information, visit:
www.ev-lectron.com
or contact us at
Made in China
Tesla Charger not included.
Lectron is not affiliated with Tesla Inc.
Lectron is a trademark of Dropcases Ltd.
Tesla is a trademark of Tesla Inc.
Page - 04
1. After connecting the Tesla charger to our adapter, please
wait 30 seconds before connecting it to the electric vehicles.
2. If you are using Tesla Destination Charger or a Tesla Wall
Connector and you see a red light blinking on the charger,
please adjust the charger current to 40A or below (i.e. set the
rotary switch to position 1-8).
3. Please make sure that the charger you are connecting to
does not exceed your EV's voltage rating.
4. Please make sure the Tesla Charger is plugged into the
adapter tightly.
