Paradyne 3163, User Manual

Page: 86 / 155

ACCULINK 3163 DSU/CSU
C-10 March 1999 3163-A2-GB20-10
Table C-4
(2 of 2)
Data Port Channel Configuration Options
Start At:
Next Clear N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 ... N24 Prev
Data Port Channel Allocation (appears for the block and ACAMI methods only). Designates the starting DS0 channel,
N1–N24 for the network interface.
Available selections are only those DS0 channels that provide enough bandwidth (based on the configured data rate) to
be used as a starting channel number.
Select the desired starting channel number by pressing the Function key under that number. When you make the
selection, the DSU/CSU allocates the correct amount of DS0 channels to support the data rate currently configured for
the port.
Clear – Deallocates all DS0 channels for this port from the network interface.
NOTE: This configuration option is not available if the individual channel allocation method (Chan) is selected using the
Assign By configuration option.
Assign To: NET
Next NET Prev
Data Port Channel Allocation Destination. NET is the only option on the Model 3163 DSU/CSU.
NET – Assigns this port to DS0 channels on the network interface.
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 ... N24
Next – – – – – – – – – – – – ... Prev
Data Port Channel Allocation (appears for the individual channel method only). Designates the DS0 channel to allocate to
this port.
Line 1 displays the 24 channels for the network interface. Line 2 displays what is allocated to the DS0 channel indicated
in Line 1. Possible values for Line 2 are:
Value Meaning
– This DS0 channel is not allocated. You can modify this value on this screen.
Prt1 This DS0 channel is allocated to Port 1.
Select the channel by pressing the Function key under that number. To deallocate a port, press the Function key under
that port number. Pressing the Function key under channels assigned to other ports has no effect.
NOTE: The DSU/CSU automatically derives the data rate for the port from the number of DS0 channels allocated.