Paradyne 3160-A3, Operator'S Manual

Page: 43 / 298

3. Operation
3160-A2-GB21-90 February 2001
3-9
NOTE:
The following procedures are examples only. Screen displays may vary
depending on the model of the DSU/CSU.
Displaying Unit Identity
The identity of the DSU/CSU (serial number, model number, software revision
level, hardware revision level, and customer identification) is available through the
Status branch of the front panel menu (see
Appendix A,
Front Panel Menu
).
The customer identification is the only identity number you can change.
Procedure
To display the DSU/CSU’s identity (ID):
1. From the top-level menu screen, select Stat.
2. From the Status screen, press the key until the ID selection appears on the
screen.
3. Select ID.
4. The following screens appear in the order listed each time you press the
key.
F1 F2 F3
DSU ESF
Stat Test Cnfig
F1 F2 F3
Status:
TStat LED ID
F1
F2 F3
Identity:
Ser=xxxxxxx
F1 F2 F3
Identity:
Mod=xxxx-xx-xxx