4. Maintenance
4-8
February 2001
3160-A2-GB21-90
Procedure
To clear the performance registers:
1. From the top-level menu screen, press the
key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
key until the ClrReg selection appears
on the screen.
4. Select ClrReg.
5. From the Clear Prf Regs screen, press F1 to clear the User registers.
If you selected User, the User performance registers are cleared, all
accumulators are reset to zero, and all status registers are cleared. The
current interval timer, the number of valid intervals count, and the total 24-hour
counts are reset to zero. The
Command Complete
message then appears.
F1
F2
F3
Control:
Rel LED ClrReg
F1
F2
F3
Clear Prf Regs:
User Prt1 Prt2
Summary of Contents for 3160-A3
