UC300 Universal Converter
8
3.2.2 Dialer Indication – Blue
3.2.3 Reset and Firmware Upgrade
3.3 Requirements
3.3.1 Cables
Depending on the setup you are using you will require some or all of the following cables.
Note:
Extra cables may be ordered separately.
The following cables supplied in the box.
• 1 – UC300 to IP150 4 wire with two 0.8mm socket ends
• 1 – UC300/IP150 to PCS250/PCS250G 4 wire with one 0.8mm socket end and one 2.54mm socket end
Figure 2 – Connector Cable IP150 to UC300
Figure 3 – Connector Cable IP150/UC300 to PCS250/PCS250G
Description Special Feature (Blue)
Behavior
In report listening
Steady blue
When data is recognized
Flashing blue
Description Special Feature (Blue and Green)
Behavior
Reset – after holding down the reset button for 5 seconds
Blue and green flash fast
Reset – after confirmation
Blue and Green off until reboot
complete
Firmware upgrade or no firmware present
Blue Blinking fast
