UC300 Universal Converter
12
Chapter 4: Configure with BabyWare
Use the Paradox BabyWare software to configure the UC300 (please note that BabyWare is not approved for EN
50131). The configuration requires Internet parameters for reporting through the IP150 and cellphone
parameters for reporting through the PCS250/PCS250G.
Before configuration make sure that you have the following:
• UC300 Panel ID, PC password Default 0000 and 0000.
• If you are connecting an IP150 you will need the IP module password.
Note:
If you are connecting PCS250 without the IP150 you will need to initiate the connection using an SMS
message or by programming the UC300 directly using 307USB. See the PCS250 Installation guide.
4.1 Configure Account
1. Open Paradox BabyWare Rev 2.9.7 or higher.
2. Click
Accounts.
Figure 8 – UC300 Accounts
3. Click the Connection Options Details button.
Figure 9 – Connection Options Settings
Note:
Consult with the system administrator regarding the settings and parameters.