16 |
Magellan & Spectra SP • Installation Guide
Arming & Disarming
Take full advantage of your system by familiarizing yourself with all the arming methods. If your system is not partitioned (see Partitioning on page 25), everything
is considered as belonging to Partition 1.
NOTE:
If you cannot arm because a zone is open, the system will enter in Bypass Programming. Enter the two digit zone you wish to bypass and press
[
ENTER
]
, or
press
[
ENTER
]
to bypass all open zones.
Regular Arming
This method will arm all the zones in the selected partition. Please note that Regular arming can also be activated using Auto-Arming (see Auto-Arming on page 17) or
One-Touch Arming (see One-Touch Arming on page 17).
How do I Regular arm?
1.
Close all zones in the desired partition.
2.
Press
[
ARM
]
+
[
USER
CODE
]
.
3.
If you have access to both partitions (see Partitioning on page 25): Press the key corresponding to the desired partition (
[1]
or
[2]
)
.
For both partitions, press
the other key after the confirmation beep.
Sleep Arming
Similar to Stay arming, Sleep arming allows users to remain in a protected area, but provides a higher level of protection. For example, in a two-story house, the
perimeter is protected with Stay arming. With Sleep arming, the perimeter as well as the main floor are protected (motion detectors, etc.), allowing you to roam the
second floor and sleeping quarters. Sleep zones are zones that are bypassed when Sleep arming. For example, when you go to sleep at night, the entire premises
except your bedroom is fully armed. Sleep arming can also be activated using Auto-Arming (see Auto-Arming on page 17) or One-Touch Arming (see One-Touch
Arming on page 17).
How do I Sleep arm?
1.
Close all zones in the desired partition (except Sleep zones
).
2.
Press the
[
SLEEP
]
key.
3.
Enter your
[
USER
CODE
]
.
4.
If you have access to both partitions (see Partitioning on page 25): Press the key corresponding to the desired partition,
[1]
or
[2]
.
For both partitions, press the
other key after the confirmation beep.
Stay Arming
This method allows you to roam freely within the premises while the perimeter is fully armed. Stay zones are zones that are bypassed when Stay arming. For example,
if you plan on staying in for the night, doors and windows can be armed without arming other zones like motion detectors. Stay arming can also be activated using
Auto-Arming (see Auto-Arming on page 17) or One-Touch Arming (see One-Touch Arming on page 17).
How do I Stat arm?
1.
Close all zones in the desired partition (except Stay zones
).
2.
Press the
[
STAY
]
key.
3.
Enter your
[
USER
CODE
]
.
4.
If you have access to both partitions (see Partitioning on page 25): press the key corresponding to the desired partition,
[1]
or
[2]
.
For both partitions, press the
other key after the confirmation beep.
Bypassing a Zone
Bypassing a zone allows you to ignore (deactivate) specified zones the next time the system is armed. For example, you may wish to bypass certain zones when
workers are renovating part of your home. Once the system is disarmed, the bypass entries are erased. When zones are bypassed, the
[
BYP
]
key will illuminate. Zone
bypassing can also be activated by using One-Touch Bypass Programming (see page 17). If One-Touch Bypass Programming is enabled, press the
[
BYP
]
key for three
seconds to enter bypass programming. To remove the Bypass feature from a zone, in step 3 enter the zone number again or press
[
CLEAR
]
to erase all current entries.
Press
[
CLEAR
]
+
[
ENTER
]
to delete bypassed zones.
How do I bypass zones?
1.
Close all zones in the desired partition (except Stay zones
).
2.
Press the
[
BYP
]
key. The
[
BYP
]
key will flash. Press
[
ENTER
]
to bypass all open zones or go to step 3.
3.
Illuminate the number(s) corresponding to the zone(s) you want to bypass by entering the zone number. Solid on = Zone open, Flash = Zone bypass, Off =
Zone closed, not bypassed.
4.
Press the
[
ENTER
]
key to save and exit. Press
[
CLEAR
]
twice to exit without saving.
