8 |
Magellan & Spectra SP • Installation Guide
Setting Chime Zones
A chime-enabled zone will advise you every time it is opened by causing your keypad to beep. Each keypad must be chimed separately.
How do I chime zones?
•
For K32+:
Press & hold the [
] key. The Arm1, Arm2, Stay1, and Stay2 LEDs will flash. Enter the zone number corresponding to the zones you want to chime.
The corresponding LED will light up. Press the
[
ENTER
]
key to exit.
•
For K35 and K37:
Press & hold the [
] key (K35) or [
] key (K37). The word
Chime
will appear on the screen. Enter the zone number corresponding to the
zones you want to chime. The corresponding LED will light up. Press the
[
ENTER
]
key to exit.
Note
:
K37 will only chime when powered by AC or when the
display is active.
•
For K10V, K10H and K636:
Press & hold the zone key (
[1]
to
[0(10)]
). Accept beep = chime on.
•
For and K32LX:
Press and hold the [
] key. Press
[1]
to select which zone to chime or press
[2]
to configure chime period. The chime period allows
you to specify the time frame in which the zone will chime. Enter the zone number corresponding to the zones you want to chime. Press the
[
ENTER
]
key to
exit.
How do I disable chime zones?
•
For K32+, K35, K37, and and K32LX
: To disable chime zones, repeat this process and enter the zone number to disable a chime zone, or press
[
SLEEP
]
to disable all chime zones instead of entering a zone number.
•
For K10V, K10H and K636
: Press & hold the zone key (
[1]
to
[0(10)]
). Fail beep = chime off.
NOTE
:
For a description of the confirmation and rejection beeps, see Keypad Feedback on page 10.
To identify your keypad, see page 11.
