Magellan & Spectra SP • Installation Guide
| 17
Bypass Recall Feature
After disarming the system, bypass entries are erased. The Bypass Recall feature reinstates the previous bypass entries saved in memory. This eliminates the need to
manually re-program the bypass entries every time you arm your system.
How do I recall bypass entries?
1.
Press the
[
BYP
]
key.
2.
Enter you
[
USER
CODE
]
.
3.
Press the
[
BYP
]
key.
4.
Press the
[
ENTER
]
key.
One-Touch Arming
One-Touch arming allows you to arm the system without using a user code. This feature must be enabled by your installer. If One-Touch Arming is programmed, you
can increase the security level of your system (from Disarm
Stay Arm
Sleep Arm
Full Arm) without a code. See Figure 1 below.
One-Touch Regular Arming
Press and hold the
[
ARM
]
key to arm all zones in the partition. If partitioned, keys
[1]
&
[2]
will flash. You can use this feature to allow specific individuals like service
personnel (e.g. cleaners) to arm without giving them access to any other alarm system operations. See Regular Arming on page 16.
One-Touch Stay Arming
Press and hold the
[
STAY
]
key to arm the perimeter (no Stay zones). See Stay Arming on page 16.
One-Touch Sleep Arming
Press and hold the
[
SLEEP
]
key to arm all zones not defined as Sleep zones. See Sleep Arming on page 16.
One-Touch Bypass Programming
Press and hold the
[
BYP
]
key to access Bypass programming mode. See Bypassing a Zone
Fast Exit
When the system is already Stay or Sleep armed: this feature will allow you to exit already armed premises and keep the system armed. Press and hold the
[
OFF
]
key
for to start the exit delay. After the exit delay has elapsed, the system will switch to its previous arming mode.
Figure 1: Arming / Disarming
Auto-Arming
Timed Auto Arming
The alarm system can automatically arm itself at a specified time every day. As with Regular arming (see Regular Arming on page 16), the system will bypass any
open zones.
How do I program the Auto-Arm Timer?
1.
Press the
[
]
key.
2.
Enter
[
MASTER
CODE
]
.
3.
Press the
[
BYP
]
key. The
[
BYP
]
key will flash.
4.
Press key
[1]
to set partition 1, or press key
[2]
to set partition 2.
5.
Enter the desired time for auto arm (24 hour clock, e.g. 18:30).
6.
Press key
[1]
to regular arm, key
[2]
to sleep arm, or key
[3]
to stay arm the partition.
