Magellan & Spectra SP • Installation Guide
| 15
Arming & Disarming with StayD
StayD simplifies your life and makes it safer by protecting you 24 hours a day, 7 days a week without ever having to disarm the system – even when entering an
armed area. StayD lives with you and protects you at all times, without any unprotected periods, and automatically re-arms the system so you don’t need to
remember to.
When entering/exiting a site, the system partly disarms to let you pass through: simply notify the system with your remote and go through the designated path
which will automatically re-arm after you pass. All other zones remain armed. The result is a system that is always protecting, without the uncertainty of whether the
system is armed or not.
Other benefits of StayD include knowing when your kids are accessing potentially dangerous areas, such as the balcony, pool or front door. Now you can truly have
peace of mind knowing that you are always protected. Consult your installer for more information.
To Turn On/Off StayD Mode
To turn on StayD mode:
[S
TAY
]
+
[C
ODE
]
+
[S
TAY
]
StayD light on
Press the
[
STAY
]
key followed by a valid code, then press the
[
STAY
]
key again within ten seconds. The StayD light will light up to confirm StayD activation, and the
system will be in Stay mode.
To turn off StayD mode:
[O
FF
]
+
[C
ODE
]
+
[O
FF
]
Off light on
Press the
[
OFF
]
key followed by a valid code, then press the
[
OFF
]
key again within ten seconds. The StayD light will turn off and the Off light will light up to confirm
StayD deactivation. With StayD disabled, the system will function as a standard security system.
To Change Arm Mode
(see Arming & Disarming on page 16)
To change the level of security - Stay to Sleep:
[
SLEEP
]
for 2 sec.
Delay
Sleep light on
Press and hold the
[
SLEEP
]
key on any keypad. All zones which will be armed in Sleep mode go into exit delay, allowing you to move to the bedroom. When the exit
delay ends, and you are in the bedroom, the rest of the interior will arm. The system is now in Sleep mode.
To change the level of security - Sleep to Stay:
[
STAY
]
for 2 sec.
Stay light on
Press and hold the
[
STAY
]
key on the keypad located in the bedroom. The system will instantly switch from Sleep to Stay mode, allowing you to leave the bedroom
and move freely inside the house. If you accidentally leave the bedroom without switching to Stay mode, all zones armed in Sleep mode will go into a delay,
allowing you enough time to switch to Stay mode.
Leaving the site - Stay to Full:
Keypad:
[
ARM
]
for 2 sec.
Delay
Arm light on
Press and hold the
[
ARM
]
key on the keypad that the exit path is assigned to. This will start an exit delay period for all zones in the exit path. After you have left the
property, all exit path zones will rearm. The system is now in Full mode.
Entering the site - Full to Stay:
Keypad:
[
CODE
]
Stay light on
When entering the property through the entry path, all zones assigned to the entry path will go into delay, allowing you to enter the house. Entering a valid code on
the keypad the entry path is assigned to ends the entry delay and switches the system to Stay Arm mode. The entry path zones will rearm. The system is now in Stay
mode.
Leaving the site without changing arm mode:
[
OFF
]
for 2 sec.
Press and hold the
[
OFF
]
key for 2 seconds on a keypad to leave the site without changing arm mode.
Advanced StayD Settings
Window Mode and Re-arm Delay
In a Stay-armed system: This mode allows you to open one exterior zone without triggering an alarm. To enter Window mode, press
[
OFF
]
, then your
[
USER
CODE
]
. All
zones that can be opened flash. The system will start an exit delay, allowing you to open an exterior zone such as a window or a door. The system will only allow you
to open one zone as the exit delay will end after doing so. When you close the open zone (window, door, etc.) that zone will re-arm.
When closing an exterior zone such as a window or door, a delay will start allowing you to close the zone properly. The re-arm delay starts when you close the zone,
and you must keep the zone closed for the entire delay period for it to re-arm. This is especially useful for windows that stick thus reducing false alarms.
Live View Mode:
During an alarm, press the
[
CLEAR
]
key to view the movement. The zone lights on the keypad will show the opening and closing of zones as they occur.
