28 |
Magellan & Spectra SP • Installation Guide
Assigning a REM3 Hand-Held 2-Way Remote Keypad to the Panel
Communicator
Test Report
Auto Arm
Erase Lost Remote Control
Step
Action
Details
1
[
]
+
[
MASTER
CODE
]
The [
] key will flash.
LED/Key on = programmed user
[
PARTITION
MASTER
CODE
]
may also be used.
2
[user number]
2 digits: 01 to 32
3
[
CODE
]
Enter 4- or 6-digit code.
4
[
CONFIRM
CODE
]
Re-enter 4- or 6-digit code.
5
[learn remote]
Press and hold the Information key ([i]) on the designated remote.
6
[1] and/or [2] + [enter]
Assign the user to one or both partitions and press
[
ENTER
]
. By default users are assigned to partition 1.
Goes to the next available user.
Step
Action
Details
1
[
]
+
[
MASTER
CODE
]
The [
] key will flash.
2
[mem]
3
[3]
= Personal Phone #1
[4]
= Personal Phone #2
[5]
= Personal Phone #3
[6]
= Personal Phone #4
[7]
= Personal Phone #5
[8]
= Pager #
4
[
PHONE
#]
+
[
ENTER
]
Enter phone # (up to 32 digits) and press [
ENTER
]. Goes to next phone#, or go to step 5 if [8] = Pager # was
selected.
5
[
MESSAGE
]
+
[
ENTER
]
Step 5 for Pager # only. Enter pager message and press [
ENTER
].
Step
Action
Details
1
[
]
+
[
MASTER
CODE
]
The [
] key will flash.
2
[mem]
Press the
[
MEM
]
key
3
[2]
Send a test report to the monitoring station.
Step
Action
Details
1
[
]
+
[
MASTER
CODE
]
The [
] key will flash.
2
[byp]
3
[1] = Auto arm (partition 1)
[2] = Auto arm (partition 2)
4
[hh:mm]
Enter time using the 24 hour format (e.g. 18:00 for 6:00 pm).
5
[1] = Regular arm
[2] = Sleep arm
[3] = Stay arm
Step
Action
Details
1
[
]
+
[
MASTER
CODE
]
2
[byp]
3
[3]
4
[all remotes] + [enter]
Press a button on all remotes. Press
[
ENTER
]
5
Press and hold [sleep] (3sec)
Press and hold
[
SLEEP
]
to erase all lost remotes.