Esprit 728 Ultra & 738 Ultra - 12 - Programming Guide
Connection Diagrams
The system hardware will recognize the following zone conditions:
Single Zone Connections
Figure 3: N.C. Contacts, without EOL Resistor
Figure 4: N.C. Contacts, with EOL Resistor (UL/cUL)
Figure 5: N.O. Contacts, with EOL Resistor (UL/cUL)
Figure 6: N.C. Contacts, without EOL Resistor, with Tamper
Recognition
Figure 7: N.C. Contacts, with EOL resistor, with Tamper and Wire
Fault Recognition (UL/cUL)
Address 088, [
MEM
] = “ON” (EOL resistor disabled)
[0] = “OFF”
[
STAY
] = “OFF”
Address 090, [8] = “OFF” (ATZ disabled)
Tamper/Wire Fault disabled.
Address 088, [
MEM
] = “OFF” (EOL resistor enabled)
[0] = “OFF”
[
STAY
] = “OFF”
Address 090, [8] = “OFF” (ATZ disabled)
Tamper/Wire Fault disabled.
Address 088, [
MEM
] = “OFF” (EOL resistor enabled)
[0] = “OFF”
[
STAY
] = “OFF”
Address 090, [8] = “OFF” (ATZ disabled)
Tamper/Wire Fault disabled.
Address 088, [
MEM
] = “ON” (EOL resistor disabled)
[0] = (See Tamper/Wire Fault definitions on
[
STAY
] = page 10.)
Address 090, [8] = “OFF” (ATZ disabled)
Address 088, [
MEM
] = “OFF” (EOL resistor enabled)
[0] = (See Tamper/Wire Fault definitions on
[
STAY
] = page 10.)
Address 090, [8] = “OFF” (ATZ disabled)
Summary of Contents for Esprit 728 Ultra
Page 18: ...Notes...
Page 19: ......
Page 20: ...paradox com PRINTED IN CANADA 07 2007 7X8ULT EP04...
