background image

  

 

Esprit 728 Ultra & 738 Ultra  - 15 -   Programming Guide

728 Ultra Wiring Diagram 

Keypads

- LED Keypads 636 and 646

- LCD Keypad 642

The maximum number of keypads per installation is 
dependent on the auxiliary output, which is not to exceed 
450mA. Refer to the “728 Ultra & 738 Ultra Reference & 
Installation Manual” for the current consumption table. 
Refer to Figure 12 on page 13 for information on keypad 
zone connections.

Please refer to Inset 1 for the 
input terminals. For the hardwired 
connections, refer to Single Zone 
Connections
 on page 12 and 
Advanced Technology Zone 
(ATZ) Connections
 on page 13.

Note: To use you must disable the PGM. To do so, 
program [2

ND

] [2

ND

] in sections 039, 040 and 042.

For use with the 708, Esprint and SRI-18 PGM expander

Disconnect the 
battery before 
replacing the fuse

Rechargeable Acid/
Lead or Gel Cell 
Backup Battery

Improper connection may 
result in damage to the system.

AUX POWER:
450mA maximum. UL/cUL: 250mA maximum for 24Hr 
Stand-by. To connect additional wiring to the auxiliary 
power, use the red (+) and the black (-) keypad connectors. 
AUX power will shut down if current exceeds 650mA.

For UL and cUL warnings, refer to the Warnings section in the Esprit “728 
Ultra & 738 Ultra Reference and Installation Manual”.

Bell/Siren

The 

BELL

 output 

will shut down if 
the current 
exceeds 3A.

To provide maximum lightning 
protection we strongly recommend 
having separate earth connections 
for the dialer and zone ground 
terminals.

To metallic 

enclosure

Cold water 

pipe or 

grounding rod

Ground 
clamp

Disconnect the 
telephone line 
before servicing.

AWG# 14 single conductor 
solid copper wire

STATUS LED:

Flash once every second = normal
Toggle ON 1s / OFF 1s = trouble
Always ON = panel is using phone line
Fast flash 4s after power up = installer lock enabled

Note: For UL installations, the metallic 
enclosure must be grounded to the cold 
water pipe or to the grounding rod.

**

** UL Note:
Do not connect this ground with 
UL installations.

16.5Vac (50-60Hz) 20VA/40VA 
transformer

Summary of Contents for Esprit 728 Ultra





















Reviews: