Page 9 of 28
Part No. 100318 Rev. 1
Issued: 2021-06-08
Step 3 - Assemble the Cross Beams (Item 6) and
Legs (Item 3)
Hardware Required:
• 4x 3/8”-16 - 4.5” Long Hex Bolts
• 8x 1/2”-13 - 4.5” Long Hex Bolts
• 4x 3/8”-16 - Kep Nuts
• 8x 1/2”-13 - Kep Nuts
• 8x 3/8” - Flat Washers
• 16x 1/2” - Flat Washers
3-A) Assemble the 2 cross beams on the 4 legs. Set the height of the cross beams such that the
top of the cross beams remain 24 inches below the water surface at the lowest water depth of the
installation location (See the Installation section of this manual for further details):
2-C) Torque the bolted connection to 23 ft-lbs.
