Page 7 of 28
Part No. 100318 Rev. 1
Issued: 2021-06-08
1-F) Torque the bolted connections to 56 ft-lbs and mark the nuts as torqued with the torque seal/
paint marker.
1-G) If the model PH-8K-4 boatlift is being assembled, bolt on the bunk attachment plates
(P/N 100430 and 100431) as shown using 5” long bolts and torque the bolts per Step 1-F. (see
illustration on next page):
1-C) Complete one side of an H-Frame:
(Rear H-Frame shown)
1-D) Repeat steps A-B for the other side:
(Rear H-Frame shown)
1-E) Repeat Steps A-D for the Front H-Frame assembly. Use the bottom set of bolt holes on the leg
extensions (item 11) in order to raise the top of the leg extensions by 2.5”. This ensures a raised
pitch of the bunks.
Top bolt hole on leg
extension is exposed on
the Front H-Frame
Leg Extension
(Item 11)
Bolt holes for
Front H-Frame
Bolt holes for
Rear H-Frame
WARNING! - Failure to bolt leg extensions as described in Step 1 will cause
improper operation of the boatlift.
