ACS-1E and ACS-1EUL Installation
Electrical Installation
20
ACS-1E and ACS-1EUL Install and Service Manual
Ver 2
3.3 Electrical Installation
3.3.1 ACS-1E and ACS-1EUL Wiring
The wiring for the ACS-1E and ACS-1EUL systems, including all of the input and output termination
points, is shown in the diagrams on the following pages. A version of the complete ACS-1E or ACS-1EUL
diagram is also present on the back of the front cover of the ACS-1E or ACS-1EUL controller box.
Take care to wire all ends (Card Reader, circuit boards, door locks and additional power sources) cor-
rectly and to label the sheathed cables for input devices (Card Readers, exit switches, door-sense
switches, sensor devices) and output devices (electrical door locks, alarm controllers, etc.). Be sure to
make a list of the terminal functions the colored wires are assigned.
3.3.1.1 Wiring the Card Readers and Basic Input Devices
The basic input wiring for the ACS-1E and ACS-1EUL Card Readers and Input devices are shown in the
diagrams below.
