Pantum BM5100 Series, User Manual

Page: 23 / 192

8
1.5. Control Panel
1.5.1. Overview of control panel
The layout of the printer control panel is shown below:
No. Name Functions
1 LCD Display Display operation interface and product information.
2 Copy Button Press this button to enter into copy mode.
3 Scan Button Press this button to enter into scan mode.
4
ID Card Copy
Button
Press this button to enter into ID Card Copy mode.
5 Wi-Fi button
Short press Wi-Fi button to turn on direct Wi-Fi connection of the printer and
automatically print out "Mobile Device Wi-Fi Connection Wizard" page (for
models with Wi-Fi function only).
Long press Wi-Fi button for over 2s to start WPS when Wi-Fi is not connected
or to disconnect Wi-Fi when it has already been connected (for models with
Wi-Fi function only).
Open save toner function(applicable to non-Wi-Fi model only).
6
Bill Copy
Button
Press this button to enter into Bill Copy mode.
7 Cancel
Execute cancel operation
Idle state interface under copy mode, to reset the "Number of Copies" to 01.
8 Start Button
This is used to start relevant operations after finishing operation settings.
In case of a feed failure, please press this key for pick-up and printing again.
9 Menu Open the main menu of control panel
10 Back Return to the previous menu.