AT-UHD-SW-51
26
The following procedure will reset the AT-UHD-SW-51 to factory-default settings. The network IP mode will be set to
DHCP mode. After a factory reset the DHCP mode, under the Network Setup page, will be set to
ON
.
1.
Login to the web server. Refer to
Introduction to the Web Server (page 38)
. The default username and
password are listed below:
Username:
root
Password:
Atlona
2. Click
Settings
in the menu bar.
3. Click the
Factory Reset
button.
4. The following message will be displayed at the top of the screen. Click
OK
to continue with the factory-default
reset procedure. Click
Cancel
to abort the process.
5.
Once the factory-default process is complete, the web server
Login
screen will be displayed.
6. The factory-reset process is complete.
Device Operation
Resetting to Factory-Defaults
Using the Web Server
