AT-UHD-SW-51
25
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AT-UHD-SW-51
POWER
INPUT
L
R
S/PDIF
1
2
3
4
5
HDMI IN
HDMI OUT
LAN
FW
DC 5V
+
-
RS-232
RX TX
AUDIO OUT
Device Operation
1.
Login to the web server. Refer to
Introduction to the Web Server (page 38)
. The default username and
password are listed below:
Username:
root
Password:
Atlona
2. Click
Settings
in the menu bar.
3. Click the
Auto Switch
drop-down list and select
On
to enable auto-switching. Auto-switching is disabled by
default. If auto-switching is not desired, select
Off
from the drop-down list.
4. Selection of the active input is complete.
5. To select the input using the front panel buttons, press and release the
INPUT
button to cycle through each of
the available inputs on the unit.
Selecting the Input
The active input can be selected from the front panel, the built-in web server, or an API call. Refer to the AT-UHD-
SW-51 Application Programming Interface for more information.
