manualshive.com logo in svg

Panduit Atlona AT-UHD-SW-51, Manual

Share
Download
Panduit Atlona AT-UHD-SW-51 Manual Download Page 33

AT-UHD-SW-51

33

Device Operation

EDID Management

Before a source can send picture and sound to a display device, the source reads the EDID (Extended Display 

Identification Data) structure, which is stored in the display.  The EDID contains information about what type of video 

and audio formats are supported by the display. The AT-UHD-SW-51 can use either the downstream EDID (from the 

display/sink), and stored, or use a built-in EDID preset.

• 

EDID Presets

•  Storing EDID Data

The AT-UHD-SW-51 provides the option of selecting a preset EDID.  The following presets are available.

 

For information on 

MEM_1

 through 

MEM_8

 settings, refer to 

Storing EDID Data (page 35)

.

EDID Presets

IMPORTANT:  

If problems are encountered when using an EDID preset, try selecting the 

STD

 EDID 

preset.

EDID listing

STD

The default (generic) EDID for use with most displays.

ATL 1080P 2CH

1920 x 1080p @ 60 Hz with two-channel audio support.

ATL 1080P Multi CH

1920 x 1080p @ 60 Hz with multichannel audio support.

ATL 1080P DD

1920 x 1080p @ 60 Hz with Dolby

®

 Digital audio support.

ATL 1080P 3D 2CH

1920 x 1080p @ 60 Hz with 3D and two-channel audio support.

ATL 1080P 3D Multi CH

1920 x 1080p @ 60 Hz with 3D and multichannel audio support.

ATL 1080P 3D DD

1920 x 1080p @ 60 Hz with 3D and Dolby

®

 Digital audio support.

ATL 720P 2CH

1280 x 720p @ 60 Hz with two-channel audio support.

ATL 720P DD

1280 x 720p @ 60 Hz with Dolby

®

 Digital audio support.

ATL 1280x800 RGB 2CH

1280 x 800 @ 60 Hz with RGB color space and two-channel audio support.

ATL 1366x768 RGB 2CH

1366 x 768 @ 60 Hz with RGB color space and two-channel audio support.

ATL 1080P DVI

1920 x 1080p @ 60 Hz DVI.

ATL 1280x800 RGB DVI

1280 x 800 with RGB color space DVI.

ATL 2160P 2CH

3840 x 2160 @ 60 Hz with two-channel audio support.

ATL 2160P Multi CH

3840 x 2160 @ 60 Hz with multichannel audio support.

ATL 4K420 (4:2:0) 2CH

4096 x 2160 (DCI) @ 60 Hz with 4:2:0 chroma and two-channel audio support.

ATL 4K420 (4:2:0) Multi CH

4096 x 2160 (DCI) @ 60 Hz with 4:2:0 chroma and multichannel audio support.

MEM_1 - MEM_8

Memory presets 1 through 8

1. 

Login to the web server.  Refer to 

Introduction to the Web Server (page 38)

.  The default username and 

password are listed below: 

 

Username: 

root

 

Password: 

Atlona 

2.  Click 

EDID

 in the menu bar.

3. 

Locate the 

EDID Settings

 section.

Summary of Contents for Atlona AT-UHD-SW-51
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands