Panduit Atlona AT-UHD-SW-51 Manual Download Page 12

Page: 12 / 55

AT-UHD-SW-51

SW-R1

Setup

Video 1

Video

Video 2

All On

Power

Vol +

Vol -

Return

Enter

Mute

Input

Audio

Off

IR Remote Control

Power On Off

Press the

button to power on the unit or press the

Off

button to turn off the unit.

2 Video All On

Press this button to enable video output on both

HDMI 1 and HDMI 2.

Video 1 On Off / Video 2 On Off

Press these buttons to enable or disable video output

on HDMI 1 or HDMI 2. Press the

button to enable

video output. Press the

Off

button to disable video

output.

4 Input

Press these button to select the desired HDMI input.

5 Audio Vol + / Vol - / Mute

Press the

Vol +

button to increase the output volume

level or press the

Vol -

button to decrease the output

volume. Press the

Mute

button to mute the audio

output.

The AT-UHD-SW-51 includes an IR remote control unit (part no. AT-SW-R1), which allows control of input/output

routing, volume, muting, and power from a remote location.

IMPORTANT:

The AT-SW-R1 IR remote can be used to control the AT-UHD-SW-51 from a maximum

distance of 15 feet (4.5 meters). Exceeding this distance may result in unreliable behavior. In

addition, environmental lighting conditiions, such as florecent bulbs, high-intensity light (sunlight),

and other factors may also affect IR operation.

NOTE:

The buttons under the Setup section do not function with the AT-UHD-SW-51.

Summary of Contents for Atlona AT-UHD-SW-51
























































Search results

Summary of Contents for Atlona AT-UHD-SW-51

Reviews:

Related manuals for Atlona AT-UHD-SW-51

Brands by name

Popular brands

Panduit Atlona AT-UHD-SW-51, Manual

Search results

Summary of Contents for Atlona AT-UHD-SW-51

Reviews:

Related manuals for Atlona AT-UHD-SW-51

Brands by name

Popular brands