AT-UHD-SW-51
44
Configuration and Management Interfaces
EDID Settings
Click these drop-down lists to select the desired EDID to be used for each input. The following EDID presets are
available. When selecting an EDID, make sure that the display/sink device is capable of supporting the resolution/
timing. If the sink device is not able to support a feature, then the source will not be displayed. Selecting the
STD
EDID will provide the most compatible settings for most displays. In addition, eight memory locations are available
for storing captured EDID data. If an EDID is stored in a memory location, it will also be added to the list available
EDID selections.
EDID Page
This page provides controls for selecting and storing EDID data. Refer to
for more
information.
EDID listing
STD
ATL 2160P 2CH
ATL 1080P 2CH
ATL 2160P Multi CH
ATL 1080P Multi CH
ATL 4K420 (4:2:0) 2CH
ATL 1080P DD
ATL 4K420 (4:2:0) Multi CH
ATL 1080P 3D 2CH
MEM_1
ATL 1080P 3D Multi CH
MEM_2
ATL 1080P 3D DD
MEM_3
ATL 720P 2CH
MEM_4
ATL 720P DD
MEM_5
ATL 1280x800 RGB 2CH
MEM_6
ATL 1366x768 RGB 2CH
MEM_7
ATL 1080P DVI
MEM_8
ATL 1280x800 RGB DVI