Panduit Atlona AT-UHD-SW-51 Manual Download Page 41

Page: 41 / 55

AT-UHD-SW-51

Configuration and Management Interfaces

The

Settings

page is divided into three sections:

System

Video

, and

Audio

. The Systems allows control of auto

switching. The

Video

section provides controls for input selection. The

Audio

section provides options to control

the output audio volume and muting.

Settings Page

Auto Switch

Click this drop-down list to set auto-switching to

off

. The default settings is

off

. When set to on, the

AT-UHD-SW-51 will automatically switch to the last-

connected port. Refer to

Enabling / Disabling Auto-

Switching (page 24)

Source

Click this drop-down list to select the desired input.

Available inputs are

HDMI IN 1

through

HDMI IN 5

Output 1

Click this drop-down list to control audio output muting.

If set to

off

, then all audio output will be muted.

Factory Default

Click this button to reset the current page to factory-

default settings. Note that clicking this button

does not

reset the AT-UHD-SW-51 to factory settings.

Summary of Contents for Atlona AT-UHD-SW-51
























































Search results

Summary of Contents for Atlona AT-UHD-SW-51

Reviews:

Related manuals for Atlona AT-UHD-SW-51

Brands by name

Popular brands

Panduit Atlona AT-UHD-SW-51, Manual

Search results

Summary of Contents for Atlona AT-UHD-SW-51

Reviews:

Related manuals for Atlona AT-UHD-SW-51

Brands by name

Popular brands