AT-UHD-CLSO-601
20
Select Network Setup from the top navigation to adjust IP information.
Network Setup
Network
DHCP - Switch between static (OFF) and DHCP (ON) IP modes.
IP, Netmask, Gateway - This will display the unit’s current DHCP IP settings. When set to static, fill in the IP
address, netmask, and gateway.
Telnet Port - Set the telnet port if needed for control. Default port is 23.
Hostname - Set the name for the matrix, this will show up in network discovery.
Login Mode - Toggle telnet login mode on and off. If on, a username and password will be required to control
the unit via telnet.
MAC Address - Displays the MAC address of the unit.
WebGUI
