AT-UHD-CLSO-601
24
WebGUI
Select EDID from the top navigation to set the preferred timings of the input ports and to adjust HDCP compliance
reporting.
EDID
Note:
CLSO-601 protects HDCP encoded content and will not pass HDCP content to a non-HDCP compliant
device.
Note:
Some devices flag all content as protected when connected to an HDCP compliant display. This prevents
what should be non-protected content from reaching devices (i.e. teleconference system) through the CLSO-601.
Note:
When HDCP reporting is non-compliant, only user created content is transmitted. Protected content from all
sources (e.g. BluRay, AppleTV, etc) is blocked.
Prefer Timing (HDMI)
Set the resolution of the HDMI ports.
Prefer Timing (VGA)
Set the resolution of the VGA ports..
RS-232
System - This will change the settings of the Master RS-232 ports
Inputs - These will change the settings of RS-232 ports 1 through 6
Output 1 - This corresponds with the RS-232 port 7
Output 2 - This will adjust the RS-232 settings of the HDBaseT receiver.
