AT-UHD-CLSO-601
9
Panel Description
-
+
RX TX
RX TX
RX TX
RX TX
RX TX
RX TX
RX TX
RX
PWRIR
MASTER
TX
AT-UHD-CLSO-601
1 POWER button
Use to turn the unit on or place into standby. LED will
illuminate blue for on and red for standby.
2 INPUT buttons
Select the button that corresponds with the inputs.
The currently selected input will illuminate blue.
3 INPUT buttons
Select the button that corresponds with the inputs.
The currently selected input will illuminate blue.
4 FUNCTION buttons
Use these buttons to open, navigate, and select
items within the on screen display menu.
5 MUTE Button
Use to mute and unmute the output audio.
6 Volume Buttons
Increase and decrease the output volume.
7 RS-232
Use for device control.
8 MIC/LINE IN
Connect microphone or line input to this port.
9 MIC/LINE Dip Switch
Use to switch between MIC, 48V, and line level input.
10 AUDIO IN
Connect 2CH audio sources to these ports.
11 AUDIO OUT
Connect to an audio DSP, amplifier, or other audio
distribution devices.
12 IR IN/OUT
Connect an a control system or IR receiver to the IR
IN port. Connect an IR blaster/emitter to the IR OUT
port for local device control.
13 MASTER RS-232
Connect a control system to this port for control of
the switcher.
14 HDMI IN
Connect HDMI sources here (DVI or DisplayPort
compatible with adapters).
15 VGA IN
Connect analog video sources here. Compatible with
component, composite, and S-Video signals.
16 HDMI OUT
Connect to a local display.
17 HDBaseT OUT
Connect a CAT5e/6/6a/7 cable from this port to a
compatible HDBaseT receiver or HDBaseT display.
(
e.g.
AT-UHD-EX-100CE-RX).
18 LAN
Connect an Ethernet cable from this port to a Local
Area Network (LAN).
19 FW
Connect a mini USB cable from this port to a PC to
firmware update the unit.
20 DC 48V
Connect the included DC 48V power supply to this
port.
14
16
15
20
17
18
19
1 2
3
4
5
7
7
10
10
11
12
13
7
7
8
9
6
