AT-UHD-CLSO-601
13
Installation
The CLSO-601 multi-function analog inputs (Input 5 and 6) can be used with most analog video signal formats
including VGA (with DDC), RGBHV (without DDC), component (YUV), S-Video, or composite video. Balanced analog
audio can be input and embedded using the provided captive screw connectors.
Each format can be directly accessed from RS-232, IR, or IP control. Front panel buttons sequentially progress
through each input format. The last format used is the first source selected when returning to these inputs. Unused
formats can be removed from the sequence using WebGUI, RS-232, or IP.
VGA (m) to BNC, VGA (m) to RCA, and S-Video to 2 BNC adaptors can be used to connect sources to these inputs.
VGA
Use a VGA to VGA cable to ensure that the Preferred Resolution DDC is communicated to your source.
RGBHV
Use a HD-15 (VGA) to 5 BNC breakout cable for this format. An existing RGBHV analog matrix switch can be
connected here to maintain full function of the analog matrix.
Component
YUV (YPbPr) signal from DVD (or other sources) can be input to the CLSO-601 using the green (Y), blue (Pb), and
red (Pr) connections on a HD-15 (VGA) to 5 BNC breakout cable or with a common VGA (m)-Component (3 RCA m)
adaptor.
S-Video
YC signal from a VCR or teleconference system can be input to the CLSO-601 using the blue (Y), and green (C)
connections on a HD-15 (VGA) to 5 BNC (m) breakout cable and a common S-Video (m) to 2 BNC (f) adaptor
Composite
NTSC, PAL, or Secam video signals can be input to the CLSO-601 using the blue connection on a HD-15 (VGA) to 5
BNC (m) breakout cable.
A common application for this type of input would be to connect a RGBHV matrix switcher to the CLSO-601. Then
each input to the matrix could be connected to a different format analog signal. A 3rd party control system could
ensure the correct format is selected to match the input to the switcher.
Analog Multi-Function Inputs
