50
PANDORA SMAR T MOTO PLUS
The level is divided into 3 sublevels
Selecting buttons
The system will automatically enter the sublevel 11.0 (Selecting buttons) after entering the level
11. The system will wait for buttons pressing. Each pressing will be confirmed with an orange flash
of the LED. You can turn on the ignition (the system will stay in programming mode). The system can
determine buttons via analog «Code Immobiliser 1» and «Code Immobiliser 2» inputs .
After selecting active buttons, press the VALET button to enter the sublevel 11.1 (Entering the PIN-code).
Entering the PIN-code
Program the Immobiliser deactivation PIN-code using the selected button or buttons on this
sublevel. The code can consist of one or more memory cells, each memory cell can store a sequence of
pressing each of the selected Immobiliser buttons.
The code is entered by pressing the selected buttons for at least 1 second. Each pressing is confirmed
with an orange flash of the LED. A pause for more than 1 second and the red LED confirms the input for
the current memory cell, you can start entering the next memory cell. After entering the code, press the
VALET button to enter the next sublevel 11.2 (Confirmation of the PIN-code input).
Confirmation of the PIN-code input
• Confirm the entered PIN-code on this sublevel. Repeat the procedure described above and press the
VALET button. The system will compare two inputs after that.
• If you correctly enter the code twice, the indicator will produce the series of red and green flashes
and the Siren will produce the series of sounds, the new code will be recorded, the system will return
to the programming level №0.
• In case of the incorrect code input the indicator will be lit red and the Siren will sound a long beep,
the system will not change the code and will return to the programming level №0.
Level №13/№15 – Emergency deactivating/activating authorization devices and
functions
See the detailed description in the «Control of the system in case of emergency» section.
Level №50 – Pairing a mobile phone
See the detailed description in the «Mobile application» section.
Level №100 – Exit the programming menu
To exit the programming menu, press and hold the VALET button for more than 10 seconds until the
tenth sound signal of the Siren or until a red flash of the LED. The system will exit programming mode
and will reboot programmatically.
Summary of Contents for Smart Moto
Page 53: ...53 USER AND INSTALLATION MANUAL ...
Page 54: ...54 PANDORA SMART MOTO PLUS ...
