43
USER AND INSTALLATION MANUAL
PROGRAMMING THE SYSTEM
System settings and parameters can be configured using the Pandora Alarm Studio and Pandora
Specialist application. Some functions can be configured only by the programming menu of the system.
It is required to put the system to programming mode to get access to the settings.
Entering/exiting programming mode
You can enter the programming mode only if the base unit is powered form a USB cable or the main
power supply is connected, the ignition is off, the system is disarmed and Service mode is off.
To enter programming mode, enter the «Service PIN-code» (default value is 1-1-1-1) using an
external VALET button or the VALET button located on the base unit.
!
I
F
YOU
DON
’
T
HAVE
THE
«S
ERVICE
PIN-
CODE
»,
YOU
CAN
ENTER
PROGRAMMING
MODE
USING
THE
«S
ECRET
PIN-
CODE
»
WRITTEN
ON
THE
OWNER
’
S
CARD
. I
T
IS
FORBIDDEN
TO
DAMAGE
THE
PROTECTIVE
LAYER
OF
THE
«O
WNER
’
S
PERSONAL
CARD
» -
THE
INFORMATION
UNDER
THE
PROTECTIVE
LAYER
OF
THE
CARD
IS
INTENDED
ONLY
FOR
THE
OWNER
OF
THE
SYSTEM
. W
HEN
THE
OWNER
COMPLAINS
ABOUT
THE
ERASED
PROTECTIVE
LAYER
,
THE
SYSTEM
IS
REINSTALLED
AT
THE
EXPENSE
OF
THE
INSTALLER
.
The system stops to execute commands when it is in programming mode. Therefore, exit
programming mode after changing settings and parameters of the system.
To exit programming mode, use one of the following methods:
• Press and hold the VALET button for more than 10 seconds;
• Turn on and then turn off the ignition when a USB cable is disconnected and the main power supply
of the system is connected;
• Disconnect the power supply (main and USB power supply).
The system will reboot programmatically (all changes will be saved) after exiting programming
mode. All ways to exit programming mode are accompanied by sound signals of the siren and light
signals of the LED indicator. The light signals indicate the number of paired control devices.
!
S
EE
THE
«C
HECKING
THE
NUMBER
OF
PAIRED
DEVICES
SECTION
OF
THE
USER
MANUAL
FOR
DETAILED
DESCRIPTION
.
Summary of Contents for Smart Moto
Page 53: ...53 USER AND INSTALLATION MANUAL ...
Page 54: ...54 PANDORA SMART MOTO PLUS ...
