27
USER AND INSTALLATION MANUAL
•
Wire №9 | Orange | 6A (+12V) | CH7
— default logic is «Turn indicators». Connect this wire to (+)
control wire of the left or right turn indicators. The wire is equipped with a 7.5A fuse.
•
Wire №10 | Orange | 6A (+12V) | CH6
— default logic is «Turn indicators». Connect this wire to (+)
control wire of the left or right turn indicators. The wire is equipped with a 7.5A fuse.
•
Wire №11 | Purple | 2A (+12V) | CH5
— default logic is «Siren». Connect this wire to +12V wire
of the siren. When using owner’s authorization devices and Immobiliser or Anti-hi-Jack modes, it is
recommended to set both «Siren» and «Beeper» logic in the settings.
•
Wire №12 | White/Green | LED/VALET
— channel for connecting the external VALET button. It is
connected to the black wire of the external button.
•
Wire №13 | White/blue | (+) | INP3
— default logic is «Brake». Connect this wire to a wire where
+12V appears when the brake pedal or lever is pressed.
•
Wire №14 | White/brown | 200mA (-) | CH2/INP5
— default logic is «Trunk». Connect this wire to a
wire that becomes grounded when the pannier opens. It is necessary to change the input type from
NO to NC in the «Inputs settings» if a magnetic reed sensor is used.
•
Wire №15 | Brown | 200mA (-) | CH3/INP6
— default logic is «Trunk». Connect this wire to a wire that
becomes grounded when the pannier opens. It is necessary to change the input type from NO to NC
in the «Inputs settings» if a magnetic reed sensor is used.
•
Wire №16 | Orange/black | CAN-H
— digital bus «CAN-High». It is connected to the corresponding
CAN-High wire of the vehicle. Before connecting the digital bus, you must select the vehicle model
(model code). Information available on www.loader.pandorainfo.com and in the Pandora Specialist
App and Pandora Alarm Studio.
Summary of Contents for Smart Moto
Page 53: ...53 USER AND INSTALLATION MANUAL ...
Page 54: ...54 PANDORA SMART MOTO PLUS ...
