Pandora Smart Moto, Manual

Page: 49 / 56

49 USER AND INSTALLATION MANUAL
• Press and hold button on a tag until the 6 flashes of the tag status indicator, release the button;
• The system will confirm pairing with a sound signal from the Siren and the LED will light red.
• The system will enter the programming level №0.
PAIRING PANDORA BAND
• Enter the programing level №10.2.1…3.
• If the LED is green, the system is ready for pairing.
• Press and hold button on the Band for 6 seconds;
• The system will confirm pairing with a sound signal from the Siren and the LED will light red.
• The system will enter the programming level №0.
• Enter the programing level №10.3.1…4.
• If the LED is green, the system is ready for pairing.
• Open the plastic case of the sensor carefully and insert a battery inside.
• The system will confirm pairing with a sound signal from the Siren and the LED will light red.
• The system will enter the programming level №0.
• Enter the programming level «Pairing an additional device RHM-03BT/PS-331BT/PS-332BT» (level
№10.6);
• System is ready for pairing, the LED lights green;
• Put a magnet on the selected zone and connect the power supply, the siren will be paired with the
system;
• The system will confirm pairing with a sound signal from the Siren and the LED will light red.
• The system will enter the programming level №0.
UPDATING FIRMWARE OF AN ADDITIONAL DEVICE
• To update firmware of an additional device, enter the «Level №10» «Sublevel» or «Cell» corresponding
to an additional device. The LED will light red after entering. Press and hold the VALET button for 5
seconds until 6 orange flashes of LED indicator or 5 sound signals of the Siren. Open the Pandora
Specialist or Pandora BT app, go to «Search device» screen and select the device and then select one
of the update options:
• INTERNET – It allows you to upload firmware from a server.
• FILE MANAGER – This function is available only for Android devices. It allows you to upload firmware
from the phone storage.