Pandora Smart Moto, Manual

Page: 16 / 56

16 PANDORA SMAR T MOTO PLUS
Indication of the SEND LED
SIGNALS DESCRIPTION
Arm/disarm
Low battery level (when installing a battery)
High battery level (when installing a battery)
faded
constant light
Battery is discharged
(when installing a battery, when the button is pressed)
Installation/replacing a battery of the tag CR2032
To install or replace the battery (CR2032), carefully follow these steps:
1. Turn the battery cover in the «OPEN» direction;
2. Remove the battery cover;
3. Remove the battery from the battery compartment and, observing the polarity, install a new one
(when installing a high-quality battery, the SEND indicator light will produce three red flashes);
4. Install and rotate the battery cover in the «CLOSE» direction. After completing the procedure, you can
continue to operate the radio tag in normal mode.
Battery
СR 2032
(+) side
+
СR2032
1 4
3
2