23
1
※
2
■
3
●
●
●
4
●
5
●
1
1
2
2
3
3
1
2
1
2
1
2
Notice
Tray
<About once a month>
Remove the tray.
Slide up the slider latch to the top.
Remove the tray from the main unit.
You cannot take the tray out without lifting
the slider latch (electrode unit). Therefore,
be sure to check that the electrode unit is
lifted before taking the tray out.
Slider latch (Sliding
while pinching.)
Floater
If there are any stubborn stains, soak it in
warm water at 40
℃
or below.
Anti-fungus
assembly
Sterilization filter
assembly
Remove the sterilization filter
assembly and anti-fungus assembly
from the tray.
Do not remove the floater (expanded
polystyrene). (The product may not work if
they are not installed correctly.)
Wash it with water
Wipe the dirt with a swab, or use a toothbrush
to scrub it.
Remove the incrustation and any other dirt
with a soft cloth moistened in water.
Install the sterilization filter assembly
and anti-fungus assembly onto the
tray.
Place the anti-fungus assembly horizontally
into the recess.
Pay attention to the orientation when
placing it in.
Install the gear of the sterilization filter
assembly into the recess of the tray.
Gear
Install the tray back to the main
unit.
Slide down the slider latch to the bottom.
Install the tray.
Set slider latch at the top position.
Slider latch
(Sliding while
pinching.)
Be sure to empty the tray before installing it
back to the main unit.
MAINTENANCE
MAINTENANCE
