Panasonic ziaino F-JPW50H Operating Instructions Manual Download Page 9

Page: 9 / 32

●

→

●

Control panel

Power Off/On

button

Air volume

button/indicator

Safety lock

button/indicator

Timer button/

indicator

When the drain indicator lights on

When the drain indicator blinks

If the drain indicator blinks, it is required to

empty the tray.

For the detailed drainage method, see

page 16~18.

The indicator lights on when the tank is not

installed.

The indicator lights on when the side panel is

opened.

While the side panel is open, the side panel

confirm indicator stays steady on.

The product enters preparatory operation in

about 20 seconds after the side panel is closed.

After the preparatory operation is completed,

the product returns to the operation mode

before the side panel is opened.

If the side panel is opened during operation,

the product will sound "BIBIBIBIBI", the side

panel confirm indicator will light on and the

operation will be paused.

After the product is powered on for 1 week

(168 hours), if the water refill indicator does

not light on the 7th time, the drain indicator

blinks, notifying that the drainage time is

approaching. (The product can still operate

even if the drain indicator blinks.)

If the water tank is removed while the

drain indicator is blinking, the drain

indicator lights on.

After the last drainage, the drain indicator

lights on simultaneously when the water

refill indicator lights on the 7th time.

Turbo button/

indicator

Water refill

indicator

When the indicator lights on, the automatic

cleaning operation is in progress. (Page 15)

If this indicator lights on, the product is

abnormal.

If this indicator lights on, please check

the error code displayed on the digital

display. (Page 31~32)

If this indicator lights on and the product

sounds "BIBI" for five times, it is required

to refill the water tank with water.

(Page 16)

If the cleaning reset indicator, the electrode

reset indicator lights on, or if ”00” appears

on the digital display of the maintenance

panel (the automatic salt tablet adding

assembly runs out of salt tablets), the

maintenance indicator lights on,

maintenance should be performed

according to the instructions.

Water refill indicator

Drain

indicator

Drain indicator

If the drain indicator lights on, drainage

is required.

Clean

indicator

Clean indicator

Maintenance

indicator

Maintenance indicator

Check

indicator

Check indicator

Tank confirm

indicator

Tank confirm indicator

Side panel

confirm

indicator

Side panel confirm indicator

EACH PARTS IDENTIFICATION

CONFIRMATION

AND SETUP

Summary of Contents for ziaino F-JPW50H

































Search results

Summary of Contents for ziaino F-JPW50H

Reviews:

Related manuals for ziaino F-JPW50H

Brands by name

Popular brands

Panasonic ziaino F-JPW50H, Operating Instructions Manual

Search results

Summary of Contents for ziaino F-JPW50H

Reviews:

Related manuals for ziaino F-JPW50H

Brands by name

Popular brands